Rivet nuts are a type of fastener that is used to join two pieces of metal together. They are similar to rivets, but they have a threaded hole in the center that allows them to be installed using a bolt or screw. Rivet nuts are often used in applications where it is necessary to fasten two pieces of metal together without having to drill a hole through them. They are also used in applications where it is necessary to create a strong and permanent joint. There are a variety of different types of rivet nut setting tools available, and the type of tool that you will need will depend on the size and type of rivet nut that you are using.
To use a rivet nut setting tool, you will first need to select the correct size and type of rivet nut for your application. You will then need to insert the rivet nut into the tool and position it in the hole that you have drilled. The tool will then be used to expand the rivet nut, which will cause it to grip the metal on both sides of the hole. Once the rivet nut has been expanded, you will be able to insert a bolt or screw into the threaded hole to complete the joint.
Rivet nut setting tools are a versatile tool that can be used for a variety of applications. They are easy to use and can create a strong and permanent joint. If you are looking for a way to fasten two pieces of metal together, then a rivet nut setting tool is a good option to consider.
How to Use a Rivet Nut Setting Tool
A rivet nut setting tool is a versatile tool used to set rivet nuts in thin metal panels. It is particularly useful in situations where access to the back of the panel is limited or impossible. With its ability to create strong, secure, and threaded connections, this tool has become indispensable in various industries, including automotive, electronics, and construction.
To use a rivet nut setting tool effectively, follow these steps:
- Choose the correct rivet nut. Determine the size and thread type of the rivet nut that matches the application requirements.
- Drill a hole. Using a drill bit slightly smaller than the diameter of the rivet nut, drill a hole in the metal panel.
- Insert the rivet nut. Place the rivet nut into the hole and orient it correctly so that the flange is flush with the surface of the panel.
- Position the setting tool. Align the setting tool over the rivet nut and ensure it is centered.
- Squeeze the handles. Slowly and firmly squeeze the handles of the setting tool. The tool will draw the rivet nut into the hole and expand it in place.
- Check the connection. Once the tool is fully squeezed, release the handles and inspect the connection. The rivet nut should be securely set and the threads should be clean.
Safety precautions: Always wear safety glasses and gloves when using a rivet nut setting tool. Inspect the tool regularly for any damage and ensure it is in good working order before use.
People Also Ask
What size hole should I drill for a rivet nut?
The appropriate hole size for a rivet nut is slightly smaller than its diameter. Refer to the manufacturer’s guidelines for specific measurements.
Can I use a rivet nut setting tool without a flange?
No
The flange on the rivet nut is necessary to distribute the load and prevent the rivet nut from pulling through the panel.
What type of rivet nuts can I use with my setting tool?
It depends
The specific type of rivet nuts that can be used with a setting tool depends on the tool’s design and capacity. Consult the manufacturer’s instructions for compatible rivet nuts.