If you’re a DIY enthusiast or simply looking to save some money, changing your brake pads is a relatively straightforward task that can be completed in a few hours. Here’s a step-by-step guide on how to change the brake pads on a 2017 Audi A4. Remember, safety first! Ensure your vehicle is parked on a level surface and engage the parking brake before beginning any work.
To start, you’ll need to gather the necessary tools and materials. These include a jack, jack stands, a lug wrench, a socket wrench or impact wrench, and a set of brake pads compatible with your Audi A4. Once you have everything you need, it’s time to get started. First, use the lug wrench to loosen the lug nuts on the wheel you’ll be working on, but do not remove them completely. Next, carefully lift the vehicle using the jack and secure it with the jack stands to ensure stability while you work.
Now that the vehicle is securely lifted, remove the lug nuts and take off the wheel. You’ll then have access to the brake caliper. To remove the caliper, use the socket wrench or impact wrench to loosen the bolts holding it in place. Carefully lift the caliper off the rotor and support it with a bungee cord or wire to prevent it from hanging by the brake line. With the caliper removed, you can now access the brake pads. Use a flathead screwdriver or brake pad spreader to compress the caliper piston and create space for the new brake pads. Remove the old brake pads and replace them with the new ones, ensuring they are correctly aligned. Reassemble everything in the reverse order, and you’re good to go! Remember to repeat the process for the other wheels and ensure your brake fluid levels are topped off before driving.
How to Change Brake Pads on a 2017 Audi A4
Changing brake pads on a 2017 Audi A4 is a straightforward task that can be completed in a few hours. However, it is important to follow the steps carefully to ensure that the job is done correctly and safely.
Tools and materials needed:
- New brake pads
- C-clamp
- Socket wrench
- Torque wrench
- Jack
- Jack stands
- Safety glasses
- Gloves
Step-by-step instructions:
- Park the car on a level surface and engage the parking brake.
- Loosen the lug nuts on the front wheel that you will be working on, but do not remove them completely.
- Jack up the car and secure it with jack stands.
- Remove the lug nuts and take off the wheel.
- Locate the caliper bolts and remove them using a socket wrench.
- Carefully lift the caliper off the rotor and support it with a piece of wire or a bungee cord.
- Remove the old brake pads from the caliper bracket.
- Clean the caliper bracket and rotor with brake cleaner.
- Apply a thin layer of brake grease to the back of the new brake pads.
- Install the new brake pads into the caliper bracket.
- Reinstall the caliper over the rotor and tighten the caliper bolts to the specified torque.
- Reinstall the wheel and tighten the lug nuts to the specified torque.
- Repeat the steps for the other front wheel.
- Test the brakes before driving the car.
People Also Ask About How to Change Brake Pads on a 2017 Audi A4
How difficult is it to change brake pads on a 2017 Audi A4?
Changing brake pads on a 2017 Audi A4 is a moderately difficult task that requires some mechanical knowledge and tools. However, it is a job that can be completed in a few hours with a little patience and care.
How often should I change my brake pads?
The frequency with which you need to change your brake pads will depend on a number of factors, including your driving habits, the type of pads you use, and the conditions in which you drive. In general, most brake pads will need to be replaced every 30,000 to 70,000 miles.
What are the symptoms of worn brake pads?
There are a number of symptoms that can indicate that your brake pads are worn, including:
- Squealing or grinding noises when braking
- A soft or spongy brake pedal
- Increased stopping distance
- Vibration in the steering wheel or brake pedal when braking